Welcome to Hebei Nanfeng!

8KW High Voltage PTC Heater for Electric Vehicle

Short Description:

High voltage coolant heater is used in electric vehicles. This high voltage heater can heat the whole electric vehicle and the battery at the same time. It is a high voltage coolant heater designed for new energy vehicles.


  • Model: WPTC13
  • Product Detail

    Product Tags

    Product Description

    The high voltage coolant heater is a heater designed for new energy vehicles. The high voltage coolant heater heats the entire electric vehicle and the battery. The PTC coolant heater provides heat to the cockpit of a new energy vehicle for defrosting and defogging. The electric parking heater can also heat other mechanisms of the vehicle that require temperature regulation (e.g. the battery).  This high voltage coolant heater is suitable for electric vehicles with rated power of 8kw and voltage range of 323-552v. The benefit of this electric parking heater is that it heats the cockpit to provide a warm and suitable driving environment, and heats the battery to extend its life. The high voltage coolant heater is installed in a water-cooled circulation system where the temperature of the warm air is gently controlled. The high voltage coolant heater drives an IGBT with PWM regulation to regulate the power and has a short time heat storage function. The high voltage coolant heater is environmentally friendly and energy saving.

    Technical Parameter

    Model WPTC13
    Rated voltage (V) AC 430
    Voltage range (V) 323-552
    Rated power (W) 8000±10%@10L/min,Tin=40℃
    Controller low voltage (V) 12
    Control signal Relay control
    Overall dimension(L*W*H): 247*197.5*99mm

    1. Rated voltage: 430VAC (323-552VAC/50Hz&60Hz, three-phase four-wire power supply), inrush current I≤30A;
    2. Rated power: 8KW±10%W&12L/min&water temperature: 40(-2~0)℃. In the workshop test, it is tested separately in three gears, according to DC260V, 12L/min & water temperature: 40(-2~0)℃, power: 2.6(±10%)KW, each group of flushing flow <15A, maximum water inlet temperature is 55℃, protection temperature is 85℃;
    3. Under normal conditions, the insulation resistance between the heater shell and the electrode is ≥200MΩ (1000VDC/3S), insulation withstand voltage: 1800VAC/3s, leakage current ≤10mA (high voltage end); 600VAC/3s, leakage current <5mA (low voltage end) .
    4. Ambient temperature: -40~105℃; Ambient humidity: 5%~90%RH; Medium: 50% water/50% ethylene glycol;
    5. Heater weight: 3.7±0.1Kg;
    6. Heater protection grade: IP67;
    7. Heater air tightness: apply pressure 0.6MPa, test for 3min, the leakage is less than 500Pa;
    8. Prohibited substances should meet the requirements of 2011/65/EU ROHS and 2000/53/EC ELV;
    9. The flame retardant performance implements GB/T2408-2008, which meets the level of HB for horizontal combustion and V-0 for vertical combustion;
    10.EMC meets the requirements of IEC61000-6-2 and IEC61000-6-4;
    11. Requirements for non-metallic materials:
    a. VOC implements VDA277, meets TOC<50g C/g, benzene<5g/g, toluene<5g/g, xylene<15g/g;
    b. Formaldehyde implements VDA275 and meets <5mg;
    c. Smell implement VDA270, meet ≤3 @ 23℃&40℃, ≤3.5@80℃;
    d. The fog implements DIN75201B and meets <5mg;

    Application

    The high voltage coolant heater is suitable for electric vehicles with rated power of 8kw and voltage range of 323-552v. It heats the antifreeze to protect the battery of the electric vehicle in the cold winter months.

    EV HEATER
    PTC coolant heater (1)

    Package & Delivery

    air parking heater
    electric parking heater

    FAQ

    1. When can I get the quotation?
    We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
    2. How can I get a sample to check your quality?
    After price confirmation, you can require for samples to check our quality. If you need the samples, we would like to send sample from our Chinese factory or you can get the sample directly from our european agent storage.
    3. How long can I expect to get the sample?
    5-10 working days for samples.
    4. What about the lead time for mass production?
    15-20 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.
    5. What is your terms of delivery?
    EXW, FOB, CIF, etc.


  • Previous:
  • Next: