NF High Voltage PTC Air Heater

Short Description:

It is primarily employed for heating the motors, controllers, and other electrical components in new energy vehicles, including hybrid electric vehicles and pure electric vehicles.

Send email to us

Product Detail

Product Tags

Description

When it comes to heating solutions, PTC (Positive Temperature Coefficient) air heaters are becoming increasingly popular due to the numerous advantages they offer over traditional electric air heaters. PTC air heaters are engineered to deliver efficient and reliable heating across a wide range of applications, positioning them as a preferred solution in numerous industrial and commercial sectors.

A key advantage of PTC air heaters is their self-regulating capability. Unlike conventional electric air heaters, PTC heaters incorporate inherent temperature control mechanisms that prevent overheating. This feature not only enhances operational safety but also prolongs the service life of the heater, contributing to long-term cost savings.

Energy efficiency represents another significant benefit of PTC air heaters. Designed to maintain a stable operating temperature, these heaters consume less energy compared to traditional electric heaters that cycle on and off to regulate temperature. This results in reduced energy expenditures and a lower environmental footprint.

Furthermore, PTC air heaters offer superior thermal performance, delivering faster and more uniform heating than standard electric heaters. Their ability to rapidly reach target temperatures and distribute heat evenly ensures consistent and effective heating outcomes.

PTC air heaters are also distinguished by their durability and reliability. The PTC elements are engineered to withstand both thermal and mechanical stresses, making them well-suited for demanding industrial environments. This resilience reduces the need for frequent maintenance and minimizes system downtime, offering additional cost advantages.

Moreover, the compact and lightweight design of PTC air heaters facilitates easy installation and integration into diverse systems. Their adaptability supports a broad range of applications, from automotive heating systems to HVAC installations, enhancing their utility across multiple industries.

In conclusion, the combination of self-regulating behavior, energy efficiency, rapid and uniform heating, durability, and design flexibility positions PTC air heaters as a superior heating solution for a variety of industrial and commercial applications. As technological advancements continue, the adoption of PTC air heaters is expected to expand further within the heating industry.

Technical Parameter

Rated Voltage	24V
Power	1000W
Wind speed	Through 5m/s
Protection level	IP67
Insulation resistance	≥100MΩ/1000VDC
Communication methods	NO

1. The heater’s exterior shall be clean, aesthetically pleasing, and free from visible damage. The manufacturer’s logo shall be clearly visible and easily identifiable.
2. Insulation resistance: Under normal conditions, the insulation resistance between the heat sink and the electrode shall be ≥100 MΩ at 1000 VDC.
3. Electrical strength: When applying a test voltage of AC 1800 V for 1 minute between the heat sink and the electrode, the leakage current shall not exceed 10 mA, with no breakdown or flashover observed. Similarly, when applying the same test voltage between the sheet metal and the electrode, the leakage current shall not exceed 1 mA.
4. The corrugated spacing of the heat dissipation fins is 2.8 mm. When a horizontal pulling force of 50 N is applied to the fins for 30 seconds, no cracking or detachment shall occur.
5. Under test conditions of wind speed 5 m/s, rated voltage DC 12 V, and ambient temperature 25 ± 2 ℃, the output power shall be 600 ± 10% W, with an operational voltage range of 9–16 V.
6. The PTC element shall be waterproof-treated, and the surface of the heat dissipation strip shall remain non-conductive.
7. The inrush current at startup shall not exceed twice the rated current.
8. Protection level: IP64.
9. Unless otherwise specified, dimensional tolerances shall conform to GB/T 1804–C.
10. Thermostat characteristics: Overtemperature protection at 95 ± 5 ℃, reset temperature at 65 ± 15 ℃, and contact resistance ≤ 50 mΩ.

Function Description

1.It is completed by the low-voltage area MCU and related functional circuits, which can realize CAN basic communication functions, bus-based diagnostic functions, EOL functions, command issuing functions, and PTC status reading functions.

2.The power interface is composed of low-voltage area power processing circuit and isolated power supply, and both high- and low-voltage areas are equipped with EMC-related circuits.

Product Size

Advantage

1. Easy installation

2. Smooth and quiet operation

3. Manufactured under a rigorous quality management system

4. High-performance equipment

5. Professional and comprehensive service support

6. Customized OEM/ODM solutions available

7. Sample provision for evaluation

8. High-quality product assurance

1) Multiple models available for selection

2) Competitive pricing

3) Timely and reliable delivery

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.