Welcome to Hebei Nanfeng!

10kw Diesel Liquid (Water) Parking Heater Hydronic

Short Description:

Our liquid heater (water heater or liquid parking heater) can warm up not only the cab but also the engine of the vehicle. It is usually installed in the engine compartment and connected with the coolant circulation system. The heat is absorbed by the heat exchanger of the vehicle itself – the hot air is evenly distributed by the air duct of the vehicle itself. The heating start time can be set by the timer.


Product Detail

Product Tags

Features

Storage temperature:-55℃-70℃;
Operating temperature:-40℃-50℃(Note:the automatic control box of this product is not suitable for working in the temperature above 500 for a long time. If use this product in Equipment such as ovens please place the heater control box in the low temperature environment outside the oven);
Water constant temperature 65 ℃ -80 ℃(adjusted according to demand);
The product cannot be immersed in water and can’t wash directly with water
and place the control box installed in the position where will not be watering;(please customize if need water proof)
This product is recommended to use appropriate low temperature of diesel or kerosene. or diesel will paraffin in oil pipeline which cause that the heater does not work. Gasoline cannot be used for fuel:

2-1

The working voltage of this product is DC12/24V.If voltage is abnormal the automatic control of heater will protect to not work(see error code table. Power generally use car battery when AC power supply it is better to use regulated power supply and pay attention that the power supply must be greater than the starting power consumption of heater. It is recommend to use the power supply which is greater or equal to 400W.when the power is not stable, the automatic control board may not operate properly;
Operating Altitude: civilian altitude≤300M military grade products at an Environmentalaltitude≤5500M
Normal working speed:0-100KM/h;
Suitable for pre-warm up of a variety of water-cooled engines and vehicles heating for below :

2

The advantages of the Liquid heater:
Dual use: preheat the cab and the engine - protect the engine, save fuel, and start more environmentally.
The heat is distributed by the vehicle's own air duct
Lower fuel consumption
Reduce noise and low power consumption
Safety and diagnostic system
ON/OFF controller or Digital controller

digital controller

Why is a NF Parking Heater installed in your vehicle?
More comfortable – never need to scratch again:
Not only do you no longer have to worry about ice scraping in the morning - the NF parking heater can also provide a comfortable and warm temperature in the car when you exercise, after work, after watching the evening movie or concert.
Reduce engine load:
One cold start of the engine will damage the engine, which is equivalent to driving a vehicle for 70km on the highway. The NF parking heater can prevent this.
The parking heater not only heats the interior of the cockpit, but also heats the cooling circulation system of the engine. Avoid serious wear during cold start, which is more conducive to the maintenance of your vehicle.
Reduce fuel consumption:
For the preheated engine, the fuel consumption of the engine is significantly reduced due to the omission of the previously described cold start and warm-up phases.
Pollution reduction:
When the engine is hot started, the harmful emissions will be reduced by about 60%. This not only alleviates your concerns, but also makes a direct contribution to the environment. Reducing harmful emissions is another good argument for using parking heaters.
More secure:
The NF parking heater ensures that your window glass defrosts on time without starting the vehicle. More clear vision - more secure!

liquid-heater-10kw-5

Application

app

Packing & Delivery

car-heater

FAQ

1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact
us for further information.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 10-20 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal.


  • Previous:
  • Next: