Welcome to Hebei Nanfeng!

Caravan RV Rooftop Parking Air Conditioner

Short Description:

The design and installation of this rooftop air conditioner is suitable for RV to improve its internal temperature and provide a comfortable environment. This caravan air parking conditioner can cool the RV when it’s hot and warm up the RV when it’s cold. Its temperature can be adjusted in the two environments.


  • Model: RTN2-100HP RTN2-135HP
  • Product Detail

    Product Tags

    Product Description

    Features:
    1.The style design is low-profile & modish, fashionable and dynamic.
    2.NFRTN2 220v roof top air conditioner is ultra-thin, and it is only 252mm high after installation, reducing vehicle height.
    3. The shell is injection-molded with exquisite workmanship.
    4. Using dual motors and horizontal compressors, NFRTN2 220v roof top trailer air conditioner provides high air flow with low noise inside.
    5. Low power consumption.

    The advantages of this caravan rooftop air conditioner:
    low-profile & modish design, pretty stable operation, super quiet, more comfortable, lower consumed power.

    NFHB9000-03

    Technical Parameter

    Model

    NFRTN2-100HP

    NFRTN2-135HP

    Rated cooling capacity

    9000BTU

    12000BTU

    Rated heat pump capacity

    9500BTU

    12500BTU(but 115V/60Hz version has no HP)

    Power consumption(cooling/heating)

    1000W/800W

    1340W/1110W

    Electric current(cooling/heating)

    4.6A/3.7A

    6.3A/5.3A

    Compressor stall current

    22.5A

    28A

    Power supply

    220-240V/50Hz, 220V/60Hz

    220-240V/50Hz, 220V/60Hz, 115V/60Hz

    Refrigerant

    R410A

    Compressor

    horizontal type, Gree or others

    Upper Unit Sizes (L*W*H)

    1054*736*253 mm

    1054*736*253 mm

    Indoor panel net size

    540*490*65 mm

    540*490*65 mm

    Roof opening size

    362*362 mm or 400*400 mm

    Net weight of roof host

    41KG

    45KG

    Indoor panel net weight

    4kg

    4kg

    Dual motors + dual fans system

    PP plastic injection cover, metal base

    Inner frame material: EPP

    Installation & Application

    RV
    详情页6
    1660111876975
    air conditioner for caravan01(1)

    1. Preparation for Installation:
    This product is installed on the roof of RV. When determining your cooling requirements, the following points should be considered: Size of RV; Window area of RV (the larger the area, the more heated) ; Thickness and thermal insulation performance of insulating materials in compartment plate and roof; Geographical location where the RV is used by users.
    2. Selection of Installation Position:
    This product should be installed on the existing roof vent. There is usually a 400x400mm + 3mm opening on the roof after the vent is removed. When there is no vent on the roof or this product needs to be installed in other positions, it is recommended to take the following measures:
    1. For the installation of a single air conditioner, the air conditioner should be installed at a position slightly ahead of the center point (as viewed from the head of the vehicle) and at the center point of left and right ends;
    2. For the installation of two air conditioners, the air conditioners should be installed at 1/3 and 2/3 positions away from the front end of RV respectively, and at the center
    point of left and right ends. It's best to install this product horizontally (subject to the standard that the RV stops on a horizontal surface) with a maximum gradient of not exceeding 15°.
    After the installation position is determined, it is required panel to check whether there are obstacles in the installation area, and the distance between the back of vehicle body and other roof equipment should be at least 457 mm.
    When the RV is moving, the top must be able to support heavy objects weighing 60kg. Generally, the static load design of 100kg can meet this requirement. Check whether there are obstacles (i.e., door openings, partition frames, curtains, ceiling fixtures, etc.) that hinder the installation of inner panel of the air conditioner.

    Indoor Panels

    NFACDB 1

     

     

     

     

    Indoor Control Panel ACDB

    Mechanical rotary knob control, fitting non ducted installation.

    Control of cooling and heater only.

    Sizes (L*W*D):539.2*571.5*63.5 mm

    Net Weight: 4KG

    ACRG15

     

    Indoor Control Panel ACRG15

    Electric Control with a Wall-pad controller, fitting both ducted and non ducted installation.

    Multi control of cooling, heater, heat pump and the separate Stove.

    With Fast Cooling function via opening the ceiling vent.

    Sizes (L*W*D):508*508*44.4 mm

    Net Weight: 3.6KG

    NFACRG16 1

     

     

    Indoor Control Panel ACRG16

    Newest launch, popular choice.

    Remote controller and Wifi(Mobile Phone Control) control, multi control of A/C and the separate stove.

    More humanized functions like a household air conditioner, cooling, dehumidification, heat pump, fan, automatic, time on/off, ceiling atmosphere lamp(multicolor LED strip) optional, etc.

    Sizes(L*W*D):540*490*72 mm

    Net Weight: 4.0KG

     

    FAQ

    Q1. What is your terms of packing?
    A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
    Q2. What is your terms of payment?
    A: T/T 100% in advance.
    Q3. What is your terms of delivery?
    A: EXW, FOB, CFR, CIF, DDU.
    Q4. How about your delivery time?
    A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
    Q5. Can you produce according to the samples?
    A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
    Q6. What is your sample policy?
    A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
    Q7. Do you test all your goods before delivery?
    A: Yes, we have 100% test before delivery.
    Q8: How do you make our business long-term and good relationship?
    A:1. We keep good quality and competitive price to ensure our customers benefit;
    2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.


  • Previous:
  • Next: