Overhead Parking Air Conditioner for Caravan RV

Short Description:

This air conditioner is designed for:
1. Installation on a recreational vehicle;
2. Mounting on the roof of a recreational vehicle;
3. Roof construction with rafters/joists on 16 inch centers;
4. 2.5″ to 5.5″ inch thick roofs.

Send email to us

Product Detail

Product Tags

Product Description

This parking air conditioner fast cooling, stable operation, virtually silent and energy efficient.
The efficiency of the air conditioner will be affected by the conditions inside and outside of the RV. Reducing the heat gain of the RV will allow the air conditioner to function with greater efficiency. Here are some suggestions to reduce heat gain in your RV:
1. Select a shaded area to park your RV.
2. Close windows and utilize the blinds and / or curtains.
3. Keep doors shut.
4. Avoid using appliances that produce heat.

Beginning the cooling / heating process early in the day will greatly improve the heat pump's ability to maintain the desired temperature. In high temperature and high humidity environments, the air conditioner should be set in Cool mode with the Fan Speed in the high position. This will allow for optimal cooling efficiency.
The advantages of this caravan rooftop air conditioner:
low-profile & modish design, pretty stable operation, super quiet, more comfortable, lower consumed power.

RT2-135：
For 220V/50Hz,60Hz version, rated Heat Pump Capacity: 12500BTU or optional Heater 2000W.
For 115V/60Hz version, optional Heater 1400W only.
RT2-150：
For 220V/50Hz,60Hz version, rated Heat Pump Capacity: 14500BTU or optional Heater 2000W.
For 115V/60Hz version, optional Heater 1400W only.

Technical Parameter

Model	NFRT2-135	NFRT2-150
Rated Cooling Capacity	12000BTU	14000BTU
Power Supply	220-240V/50Hz, 220V/60Hz, 115V/60Hz	220-240V/50Hz, 220V/60Hz,115V/60Hz
Refrigerant	R410A
Compressor	vertical rotary type, LG or Rechi
System	One motor + 2 fans
Inner frame material	EPS
Upper Unit Sizes	890760335 mm	890760335 mm
Net Weight	39KG	41KG

Indoor Panels

Indoor Control Panel ACDB

Mechanical rotary knob control, fitting non ducted installation.

Control of cooling and heater only.

Sizes (L*W*D):539.2*571.5*63.5 mm

Net Weight: 4KG

Indoor Control Panel ACRG15

Electric Control with a Wall-pad controller, fitting both ducted and non ducted installation.

Multi control of cooling, heater, heat pump and the separate Stove.

With Fast Cooling function via opening the ceiling vent.

Sizes (L*W*D):508*508*44.4 mm

Net Weight: 3.6KG

Indoor Control Panel ACRG16

Newest launch, popular choice.

Remote controller and Wifi(Mobile Phone Control) control, multi control of A/C and the separate stove.

More humanized functions like a household air conditioner, cooling, dehumidification, heat pump, fan, automatic, time on/off, ceiling atmosphere lamp(multicolor LED strip) optional, etc.

Sizes(L*W*D):540*490*72 mm

Net Weight: 4.0KG

Installation & Application

INSTALLATION INSTRUCTIONS
1. PRECAUTIONS
A. Read installation and operating instructions carefully before attempting to start your air conditioner / heat pump installation.
B. The manufacturer will not be liable for any damages or injury incurred due to failure to follow these instructions.
C. Installation must comply with the National Electrical Code and any State or Local Codes or regulations.
D. DO NOT add any devices or accessories to this air conditioner / heat pump except those specifically authorized by manufacturer.
E. This equipment must be serviced by qualified personnel and some states require licensed personnel.
2. CHOOSING A LOCATION FOR THE AIR CONDITIONER / HEAT PUMP
This product is designed for use as a RV roof top air conditioner / heat pump. The use of this product in other applications will void the manufactures warranty.
A. NORMAL LOCATIONS:
The unit is designed to fit over an existing roof vent opening. When the vent is removed, it normally creates a 14-1/4" x14-1/4" ‡1/8" opening.
B. OTHER LOCATIONS:
When a roof vent is not available or another location is desired, the following is recommended:

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.