New Electric Water Heater for Electric Vehicle

Short Description:

New electric water heaters allow the battery to be at the proper temperature to ensure the proper operation of the vehicle’s entire system. When the temperature is too low, these lithium ions will be frozen and hinder their own movement, making the battery’s power supply capacity drop drastically, so in winter or when the temperature is too low, it is necessary to preheat the battery in advance.

Model: HVH-Q20

Send email to us

Product Detail

Product Tags

Product Description

Electric vehicle battery heaters allow the battery to be at the proper temperature to ensure the proper operation of the vehicle's entire system. When the temperature is too low, these lithium ions will be frozen and hinder their own movement, making the battery's power supply capacity drop drastically, so in winter or when the temperature is too low, it is necessary to preheat the battery in advance.
New energy pure electric vehicle battery pack heating system mainly through the following two ways: preheating heating, fuel water heating heater through the installation of new energy electric vehicle water heating heater, through the transfer of heat to the battery pack heating has reached the normal working temperature. High-voltage electric heater by installing PTC heater to the new energy electric vehicle, can transfer heat to the electric vehicle battery pack, so that it is preheated, so that it is at the normal working temperature.

Advantages

*Adjustable power, energy saving, high heat conversion efficiency
*Support CAN communication, applicable to new energy commercial vehicle heating, commercial *Vehicle battery heating
*Protection grade IP67

Product Parameter

	10KW	15KW	20KW
Rated voltage（V）	600V	600V	600V
Supply voltage (V)	450-750V	450-750V	450-750V
Current consumption (A)	≈17A	≈25A	≈33A
Flow (L/h)	＞1800	＞1800	＞1800
Weight (kg)	8kg	9kg	10kg
Installation size	179x273	179x273	179x273
Control signal	Rocker switch hardwire control	Rocker switch hardwire control	Rocker switch hardwire control

Application

Installation position
The installation position should be determined according to the specific vehicle model. The water pump shall be integrated with the heater and installed at the water inlet of the heater. The installation position of the heater should be lower than that of the water pump, which can not only make the water circulation more smooth, but also ensure the fluidity of the loop as much as possible when the water pump stops due to fault. The heater shall be installed in the ventilated space of the vehicle as far as possible, and the temperature shall not be lower than + 85 ℃ if installed in the engine compartment.

Packing & Delivery

FAQ

1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact
us for further information.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 10-20 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal.